Series 2200 Programmable DC Power Supplies Reference Manual
Section 4: Command reference
2200S-901-01 Rev. C / March 2016
4-15
[SOURce:]LIST:MODE
This command determines the response of the power supply to a
trigger in list mode.
Group
Source
Syntax
[SOURce:]LIST:MODE
{CONTinuous|STEP}[SOURce:]LIST:MODE?
Related
Commands
(on page 4-13),
(on page 4-16)
Arguments
CONTinuous:
Sets the power supply to execute the entire list in
response to a trigger.
STEP:
Sets the power supply to execute one step per trigger.
Returns
CONT|STEP
Examples
LIST:MODE CONT
LIST:MODE?
might respond with STEP to indicate that the active
list is configured to wait for one trigger for each step.
[SOURce:]LIST:RCL (no query form)
This command recalls a previously saved list from the specified
storage location and makes it the active list for editing or execution.
Group
Source: List
Syntax
[SOURce:]LIST:RCL <NR1>
Related
Commands
[SOURce:]LIST:SAVe (no query form)
Arguments
<NR1>
is an integer in the range from 1 to 8, representing a list
storage location.
Examples
LIST:RCL 5
would make the list stored in location 5 the active list
for editing or execution.