Series 2200 Programmable DC Power Supplies Reference Manual
Section 4: Command reference
2200S-901-01 Rev. C / March 2016
4-25
[SOURce:]VOLTage:PROTection:STATe
This command activates, deactivates, or checks the status of
overvoltage protection (OVP).
Group
Source
Syntax
[SOURce:]VOLTage:PROTection:STATe {0|1|OFF|ON}
[SOURce:]VOLTage:PROTection:STATe?
Related
Commands
[SOURce:]VOLTage:PROTection[:LEVel]
(on page 4-24)
(on page 4-26)
Arguments
0
or
OF
F sets the over voltage protection to off.
1
or
ON
sets the over voltage protection to on.
Returns
0|1 means the over voltage protection is off.
Examples
VOLT:PROT:STAT 1
VOLT:PROT:STAT?
might return
1
, which would indicate that
overvoltage protection is active.