background image

Model No.

 Description

PRODUCT

C

ONCEPT AND MAIN APPLICATIONS

P  1/16

S

pecification

S

tandard equipment

6842, 6843, 6844

Auto Feed Screwdriver

Models 6842, 6843 and 6844 have been developed
as the successor models of 6833 series models.
These models feature more reliable casing attachment
with the following benefits:
    Rigid aluminum casing
    Stopper base with anti-tilt device for preventing screws from swaying
    Rubber cap securely fixed to stopper base
    Dust-proof construction for smooth sliding action

6842 series also includes Auto feed screwdriver with coil magazine
available as Model 6845.

Dimensions: mm (")

Width (W)

Height (H)

Length (L) 400 (15-3/4) 440 (17-1/4)

6842/ 6843

6844

75 (2-15/16)

243 (9-9/16)

L

H

O

ptional accessories

W

Specification

Net weight: kg (lbs)

2.0 (4.4)

2.1 (4.6)

Model

6843

6844

Power supply cord: m (ft)

Europe: 4.0 (13.1), Other countries: 2.5 (8.2)

6842

6842/ 6843/ 6844

6842/ 6843

Continuous Rating (W)

Voltage (V)

Cycle (Hz)

Input

Output

Max. Output (W)

110
120

220
230
240

4.5
4.3

2.3
2.2
2.1

50/60
50/60

50/60
50/60
50/60

470

---

470
470
470

190
190

190
190
190

400
400

400
400
400

Current (A)

Note: The standard equipment for the tool shown above may differ by country.

Phillips bit 2-162 or 2-157 (for 6842/ 6843)
Square bit 2-162 or 2-157 (for 6842/ 6843)
Phillips bit 2-182 or 2-177 (for 6844)
Square bit 2-182 or 2-177 (for 6844)

Extension handle
Casing attachment
Plastic carrying case

Phillips bit 2-162 or 2-157 ....................... 3
Belt clip ................................................... 1
Thumb screw (for fixing Belt clip) .......... 1
Plastic carrying case ................................ 1 

6844
Phillips bit 2-182 or 2-177 ....................... 3
Belt clip ................................................... 1
Thumb screw (for fixing Belt clip) .......... 1
Plastic carrying case ................................ 1 

4 (5/32)

25 to 55

(1 to 2-3/16)

45 to 75

(1-3/4 to 2-15/16)

Diameter

Overall length

6,000

3,000

4,700

No load speed: min.

-1 

= rpm

Driver bit: mm (")

Capacities: mm (")
[collated drywall screw]

Reverse switch

Protection against electric shock

6.35 (1/4) Hex

162 (6-3/8) or 157 (6-3/16)

182 (7-1/8) or 177 (7)

Shank

Overall length*

Yes

Double insulation

*Overall length of driver bit may differ by country.

6842/ 6843

6844

T

ECHNICAL INFORMATION

Summary of Contents for 6842

















Reviews: