Section 2: General operation
Series 2200 Programmable DC Power Supplies Reference Manual
2-20
2200S-901-01 Rev. C / March 2016
Recall the power supply ON/OFF output state at power on
The Output Recall control determines the On or Off output state after the power supply is powered
on. If you select
On
, the power supply will restore the state of the output to that which was in use
before the power was last turned off. If the output was turned on when the power supply is turned off
or loses power then the output will return to the On state when the power supply is turned back on or
power is restored. Selecting
Off
will disable this function and the output channel will always be set to
Off after the power supply is powered on.
To enable or disable this control:
1. Press the
Shift
and
Menu (1)
to access the configuration menus.
2. Use the up and down arrow keys to select
>User
.
3. Press
Enter
.
4. Use the up and down arrow keys to select
>Output Recall
.
5. Press
Enter
.
6. Use the up or down arrow keys to select
>On
or
>Off
.
7. Press
Enter
.
8. Press
Esc
to exit the menu system.
Wait 3 seconds after changing the settings to allow the settings to be completely stored before
powering off the instrument.
The default value for the Output Recall control is Off.