3-1
3
Setup and Installation
Read this section and all related DriverLINX documentation before you
attempt to install and use your DDA-08/16 board.
Unpacking the Board
Caution:
A discharge of static electricity from your hands can seriously
damage certain electrical components on any circuit board. It is
recommended that you use wrist strap grounds when handling a board. If
wrist strap grounds are not available, discharge static electricity from
yourself by touching a grounded conductor such as your computer chassis
(your computer must be turned OFF). When handling a board, always
hold it by the edges and avoid touching any board components.
To prevent damage to your DDA-08/16 board, perform the following
steps when unpacking the board:
1. Remove the wrapped DDA-08/16 board from its outer shipping
carton.
2. Carefully remove the board from its anti-static wrapping material.
(Store the wrapping material for future use.)
3. Inspect the board for signs of damage. If any damage is apparent,
arrange to return the board to the factory; refer to Section 7 for more
information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com