Handheld Terminal
KeTop - Specific Operating Instructions
User's Manual, Version: 1.3
101
© KEBA 2007
8.5 Transfering Files
8.5.1
Transfer via external storage device (USB-Stick)
For further information on suitable storage devices please refer to the sec-
tion "PC-card slot for PC-cards I, II, III" and/or "Compact Flash - Card Slot"
in the chapter "Connection” or “USB-Stick”.
1)
Insert the external storage device into a suitable PC.
2)
Copy the required files to the external storage device.
3)
Insert the external storage device into the KeTop.
4)
Copy the required files from "\storage card" or “\hard disk” to "\ipsm".
8.5.2
Transfer via network connection by SMB acces from PC to KeTop
This kind of SMB access is only possible with Windows XP Professional
and some Versions of Windows 2000.
For general information see the ", section "Ethernet" in the chapter "Con-
nection”.
The KeTop must have a valid Ethernet address.
In case there is no DHCP-server in the network, the IP-address can be set
via "Start
Î
Settings
Î
Control Panel
Î
Network and Dial-up Connections
Î
SMSC911X1...
Î
IP Address..."
To save the IP-address go to "Start
Î
Programs
Î
KETOP
Î
Registry
Backup" and restart the KeTop.
(The Ethernet-connection can be checked with "Ping".)
The PC now has full access to the directory structure at the KeTop so that
all required files can be copied from the PC to "\ipsm" at the KeTop.
8.5.3
Transfer via network connection by access from KeTop to the PC
For general information see the section "Ethernet" in the chapter "Connec-
tion”.
The KeTop must have a valid Ethernet address.
In case there is no DHCP-server in the network, the IP-address can be set
via "Start
Î
Settings
Î
Control Panel
Î
Network and Dial-up Connections
Î
SMSC911X1...
Î
IP Address..."