Home
/
Keba
/
KeTop T50VGA
/
User Manual

Keba KeTop T50VGA, User Manual, Page: 100 / 165

Share

Page: 100 / 165

Keba KeTop T50VGA User Manual Download Page 100

KeTop - Specific Operating Instructions

KeTop T50VGA

100

User's Manual, Version: 1.3

© KEBA 2007

8.3 Installation of Programs

Programs can be only installed in the IPSM (Intel Persistent Storage Man-
ager) directory. Since only this directory is stored in the flash, data installed
in another way will get lost after turning off the KeTop.

Installation data entered in the registry can be saved with the command
„\Windwos\RegistryBackup.exe“.

Infomation

•

System files, which are copied to the directory \windows while
installation, do not remain durably stored. For this reason these files
must be copied manually into the directory \IPSM\windows (if
necessary, this directory must be created by the user). With a restart of
Windows CE these files are copied automatically into the directory
\windows. So, these files are again available for the operating system
and are again present also after a restart.

8.4 Saving Files

Files must be saved in the IPSM directory. The contents of other directories
are not saved when the device is turned off.

«
...
98
99
100
101
102
...
»

Summary of Contents for KeTop T50VGA






































































































































































Reviews:

No comments