Keba KeTop T50VGA User Manual Download Page 12 | Manualshive

Page: 12 / 165

Keba KeTop T50VGA User Manual Download Page 12

Safety notes

KeTop T50VGA

12

User's Manual, Version: 1.3

© KEBA 2007

2 Safety

notes

2.1 Representation

At various points in this manual you will see notes and precautionary warn-
ings regarding possible hazards. The symbols used have the following
meaning:

!

DANGER!

•

indicates an imminently hazardous situation which, if noch avoided, will
result in death or serious injury.

!

WARNING!

•

indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury..

!

CAUTION!

•

means that if the corresponding safety measures are not taken a poten-
tially hazardous situation can occur which, if not avoided, may result in
property damage or slight bodily injury.

NOTICE

•

NOTICE used without the safety alert symbol indicates a potentially
hazardous situation which, if noch avoided, may result in property
damage.

•

This symbol reminds you of the possible consequences of touching
electrostatically sensitive components.

Information

Informations on use of equipment and useful practical tips are identified by
the symbol "Information". "Information" do not contain any information that
draws attention to potentially dangerous or harmful functions.

«
...
10
11
12
13
14
...
»

Summary of Contents for KeTop T50VGA






































































































































































Reviews:

No comments