manualshive.com logo in svg

Keba KeTop T50VGA, User Manual, Page: 102 / 165

Share
Download
Keba KeTop T50VGA User Manual Download Page 102

KeTop - Specific Operating Instructions 

KeTop T50VGA 

102 

User's Manual, Version: 1.3  

 

© KEBA 2007 

To save the IP-address go to "Start 

Î

 Programs 

Î

 KETOP 

Î

 Registry 

Backup" and restart the KeTop. 
(The Ethernet-connection can be checked with "Ping".) 
 
Then enter the IP-address of the KeTop in the address line of the Windows 
Explorer at the PC. (e.g.: \\192.168.30.107) 
 
After start-up of the KeTop start the Windows Explorer at the KeTop. (Start 

Î

 Programs 

Î

 Windows Explorer)  

 
The shared directory of the PC can new be addressed in the address line of 
the Windows Explorer at KeTop with "\\<pcname>\<share name>". (e.g.: 
\\tkg007\temp) 
 
The directory at the PC must be shared and a user with the necessary 
rights to access must exist. 
 
The files can now be copied from the PC to "\ipsm" at the KeTop. 
 

8.5.4 

Transfer via ActiveSync 

Therefor see chap. 

Remote Software ActiveSync

. 

 

8.6  Changeover from KeTop T100 

If you change over from a KeTop T100 to a KeTop T50VGA or KeTop T41, 
the following must be observed when setting the baud rate for the RS-422-
A interface (Com5): 
 

z

 

The setting for the RTS line (

DBC.fRtsControl

) must be set from 

disabled to 

enabled

 for the KeTop T50VGA/T41 (the KeTop T100 had 

the setting disabled). 

 

z

 

The baud rate and RTS settings can be read and/or changed via the 
Windows-API functions 

GetCommState

 and 

SetCommState

. 

 

Summary of Contents for KeTop T50VGA






































































































































































Reviews:

No comments