manualshive.com logo in svg

Keba KeTop T50VGA, User Manual, Page: 15 / 165

Share
Download
Keba KeTop T50VGA User Manual Download Page 15

Handheld Terminal 

Safety notes 

User's Manual, Version: 1.3 

15 

© KEBA 2007 

 

2.3 Personnel 

safety 

instructions 

!

 

WARNING! 

Danger to persons by electric shock! 

•

 

Only supply the device with power from voltage sources having protec-
tive extra-low voltage (e.g. SELV or PELV acc, to IEC 61131-2) 

•

 

Only connect voltages and circuits which are safely separated from 
dangerous voltages (e.g. by means of sufficient insulation) to connec-
tions, terminals or interfaces up to a rated voltage of 50 V.

  

 

!

 

CAUTION! 

Danger of fire in case of component failure! 

•

 

In final application, make sure the 24 V DC power supply to the opera-
tor panel is adequately fused! 
Max. permissible fuse is 20A! (see chap. Power supply operator panel)

 

 
 

!

 

WARNING! 

•

 

For the right projecting of the Handheld Terminal the manufactorer 
must enforce a hazard and risk analysis. The following safety aspects 
must be considered: 
 
- Right cable length for limitation of workspace. 
- Is an emergency stop button necessary and permissible? 
- Is the safety category for the application sufficient

? 

•

 

The device may be operated in faultless condition only and the operat-
ing instructions must be observed. 

•

 

The operator must have a sufficient educational level and must know 
details of intended use described in the user’s manual. 

•

 

The safety advices in the following chapters must be considered abso-
lutely.  

•

 

Further informations to safety and EMC are included in chapt. „CE Con-
formity, Directives and Standards“. They must be considered abso-
lutely.

 

 
 

Summary of Contents for KeTop T50VGA






































































































































































Reviews:

No comments