Keba D3DP 3 Series, Project Engineering Manual, Page: 9 / 82

D3­DP 3xx/x Introduction
Project engineering manual V1.00
9
© KEBA
1 Introduction
1.1 Purpose of the document
This document describes the structure of the supply module D3­DP 3xx/x.
Information
This manual is not adressed to end customers! Necessary safety notes for
the end customer have to be taken into the customer manual in the respec­
tive national language by the machine builders and system providers.
1.2 Preconditions
This document contains information for persons with the following skills:
Target group Prerequisite knowledge and abilities
Safety engineer for "Func­
tional Safety"
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
● Principles of functional safety
● Relevant standards and safety regulations for the machine/
system, particularly knowledge about validation according
to EN ISO 13849,
● Special risk potential of the machine/system and the pro­
duction process
● Specific protective measures to avert machine­specific
hazards (based on hazard and risk analysis)
● Functioning and application limits of the safety components
(including safety PLC)
● In­depth knowledge of national accident prevention regula­
tions.
Project engineer
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
● Current valid safety regulations,
● Fundamental validation concepts according to EN ISO
13849,
● Method of operation of a PLC,
● the application.