Keba D3DP 3 Series, Project Engineering Manual, Page: 72 / 82

D3­DP 3xx/x EC directives and standards
Project engineering manual V1.00
72
© KEBA
13 EC directives and standards
13.1 EC directives
Directive 2004/108/EG Directive on electromagnetic compatibility
Directive 2011/65/EU ROHS directive
Directive 2006/95/EG Low voltage directive
13.2 Standards
To check the conformity of the system with the directives, the following non­
binding legal European standards were applied:
13.2.1 EMC directives
EN 61800­3:2004 + A1:2012
Adjustable speed electrical power drive sys­
tems – Part 3: EMC requirements and spe­
cific test methods
13.2.2 Electrical safety and fire protection
EN 60204­1:2006 + A1:2009
Safety of machinery ­ Electrical equipment of
machines ­ Part 1: General requirements
EN 61800­5­1:2007
Adjustable speed electrical power drive sys­
tems ­ Part 5­1: Safety requirements ­ Elec­
trical, thermal and energy
13.2.3 Environmental and surrounding conditions
EN 61800­2:1998
Adjustable speed electrical power drive sys­
tems ­ Part 2: General requirements; rating
specifications for low voltage adjustable fre­
quency a.c. power drive systems
13.3 CE Certification
The D3­DP 3xx/x conforms to the requirements for installation in a machine
or system according to the Low Voltage Directive 2006/95/EC. The D3­DP
3xx/x is accordingly CE marked. The D3­DA 3xx/x together with the D3­DP
3xx/x supply module and in compliance with the installation notes and use of
wires and accessoires which are suggested in chapter
15.1 Accessories and
Connection technology conforms to the EMC directive 2004/108/EG. The CE
mark on the type plate indicates conformity with the above directives.
For validity of the CE marking, also see the data in 15.3 Selection of mains
filter (for max. permitted number of axis and the max. permitted total cable
length of all axis).