Keba D3DP 3 Series, Project Engineering Manual, Page: 60 / 82

D3­DP 3xx/x Diagnosis
Project engineering manual V1.00
60
© KEBA
8 Diagnosis
8.1 Flashing code
The yellow LED has only during software update a defined function.
LED yel­
low
LED red LED green State axis
long
(0,8 s)
long
(0,8 s)
1)
short
(0,4 s)
2)
On On On ­
Restart / starting or loading
firmware update
­ ­ ­ ­
Self initialization during device start
up
­ Off 1 x 1 x Not ready (to switch on)
­ Off 2 x 2 x Switch on disabled
­ Off 3 x 3 x Axis ready (Ready to switch on)
­ Off 4 x 4 x Axis switched on
­ Off 5 x 5 x Operation enabled
­ Off 6 x 6 x Quickstop
­ Error code 7 x 7 x Fault reaction active
­ Error code 8 x 8 x Error
1)
LED green long = in standby mode
2)
LED green short = control active