Keba D3DP 3 Series, Project Engineering Manual, Page: 16 / 82

D3­DP 3xx/x Safety notes
Project engineering manual V1.00
16
© KEBA
Caution
Improper use of the assembly or the control system leads to irreparable
damage!
● Turn off the power supply before inserting or removing the module.
Otherwise, the module can be destroyed or undefined signal states can
lead to damage of the control system.
● If there are further power supply units in the system, they must also be
turnedoff, to ensure that no electrical voltages are present at the inputs
(and possibly the relay outputs) of the safety control.
Caution
● Correct operation and safety of damaged components cannot be guar­
anteed. Damaged products must never be installed or put into operation.
Defective products must be replaced immediately.
Information
Due to product monitoring obligation we ask you to report promptley to
KEBA any possible potentially dangerous incidents, which are related to
KEBA safety technology.
Furthermore, it is asked to send all safe products that have failed due to a
defect for purposes of analysis to KEBA, even if they are considered as ir­
repairable.
KEBA shall assume no liability or warranty for consequential losses, which
may arise of:
● Disregard of directives and standards
● Illegal changes
● Improper use
● Disregard of instructions in this document