Keba D3DP 3 Series, Project Engineering Manual, Page: 10 / 82

D3­DP 3xx/x Introduction
Project engineering manual V1.00
10
© KEBA
Target group Prerequisite knowledge and abilities
Electrician
Professional training in electrical engineering (based on indus­
try­standard training guidelines).
Knowledge about:
● Current valid safety regulations,
● Wiring guidelines,
● Circuit diagrams,
● Professional installation of electrical connections according
to national and international guidelines.
Programmers
Technical training (University of Applied Science, engineering
degree or corresponding professional experience).
Knowledge about:
● Current valid safety regulations,
● Method of operation of a PLC,
● Programming of a safe PLC.
Start­up operator
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
● Current valid safety regulations,
● Fundamental validation concepts according to EN ISO
13849,
● Method of operation of the machine or system,
● Fundamental functions of the application, system analysis
and troubleshooting,
● Setting options on the operating devices.
Service technician
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
● Method of operation of a PLC,
● current valid safety regulations,
● Fundamental validation concepts according to EN ISO
13849,
● Method of operation of the machine or system,
● Diagnostic options,
● Systematic fault analysis and remedial action.