30
Initial settings
Creating au one-ID
Create an au one-ID on your IS11T and save the au one-ID
Details to your IS11T.
In the home screen, → "Settings"
→ "au One-ID Setting"
"OK" → "au one-IDの設定・保存 (au one-ID
Setting & Save)"
Authentication starts.
• Tap "au one-IDと は？ (What is au one-ID?)" to start the
browser and display the description on the au one-ID.
Follow the on-screen instructions to set au
one-ID
• If you already have an au one-ID, set your au one-ID.
If you do not have an au one-ID, register a new ID.
Configuring initial e-mail settings
To use e-mail, subscription is required. If you do not
subscribe at the time of purchase, contact an au shop or
Customer Service Center.
In the home screen, (E-mail)
This connects to the server so you can configure initial
settings. Please wait.
◎ When configuring initial settings, select "Japan" for the "Area
Settings", and configure settings in a location in Japan where
signal reception is good.Settings may not be configured
correctly if you are in a location where signal reception is poor
or if you are moving.
◎ Depending on the time of day, it may take anywhere from 30
seconds to three minutes to configure initial settings. Continue
waiting as long as the message "Configuring mail settings.
Please wait." is displayed.
