Kaye ValProbe RT, User Manual

Page: 81 / 168

Chapter 7: Defining Study Setups
Kaye ValProbe RT User Manual 68
7.7. Specifying Group Calculations
Figure 76: Calculations
Once you have defined sensors and assigned them to one or more groups, the next step is to
specify calculations to be performed on the group of sensors during the qualification study.
Calculations include, lethality, saturation pressure of steam, and saturation temperature of
steam calculations.
The Statistical Calculations are all preselected by default and are calculated.
Note: If lethality is selected in the setup, the report tool requires the definition of an exposure
cycle as mandatory.
It is also possible to define events to monitor during the study. These events are listed in the
reports and can be used to define reporting tool cycles.