Kaye ValProbe RT, User Manual

Page: 46 / 168

Chapter 3: ValProbe RT System Connections
Kaye ValProbe RT User Manual 33
e. Select Obtain an IP address automatically , then select OK
and Close .
Figure 48: Ethernet Properties
f. Ensure that the Base Station and Console are connected to
the Network via Ethernet cables.
6. Return to the ValProbe RT software’s Select Base Station screen.
Figure 49: Select Base Station
Select the Discover BS button. If the Network connection and setup
were successful, the Base Station blue tile appears with the network
assigned IP address.
Note: The discovery function can only detect Base Stations in the same
IP segment and the same subnet as the computer. If the Base
Station is not in the same sub segment or configured to another
subnet mask, you must manually add the IP using the Add button.
If the Base Station discovery was unsuccessful, contact Kaye
support or your company IT department.
WARNING! If a Base Station is configured to a static IP address, it is
the only way to communicate with it. If the IP is changed
and the “Apply” command is sent, the previous setup is not
active for any further connection. If the IP address is not
reachable or forgotten, the Base Station may need to be
reset.