Kawai Concert Performer CP139 Quick Start Manual Download Page 197

Page: 197 / 220

Page

157

Appendices

3) USB MIDI Information

In order to exchange MIDI data between the digital piano and a computer via USB connection, USB-MIDI driver

software must be installed on the computer to allow proper operations. Please read the following instructions

carefully as a different USB-MIDI driver may be necessary depending on the computer OS.

Windows XP / Me

The standard USB-MIDI driver installed on Windows will be used.

This USB-MIDI driver will be automatically installed when the unit is connected to the computer.

To establish MIDI communications with the unit by using an application, select “USB audio device” to deﬁne the

CP as the MIDI device.

Windows 7 / Vista / 2000 / 98SE

You will need to install the speciﬁed, special USB-MIDI driver.

Please visit the KAWAI web site at the address below and download the USB MIDI driver installation program.

http://www.kawaius.com/archive/download_archive_2.html

Read the instruction manual thoroughly before connecting the unit to the computer, and make sure to install the

driver. If you connect the unit to the computer without installing the driver, the USB MIDI driver may not operate

correctly. If this occurs, use the driver update function of the OS to install the appropriate USB MIDI driver, or

delete the driver by using the driver delete function, and then reinstalling the driver again.

To establish MIDI communications with the unit by using an application, select “KAWAI USB MIDI IN” and “KAWAI

USB MIDI OUT” to deﬁne the unit as a MIDI device.

Mac OS X

When the CP is used with Mac OS X, the instrument will be recognized as a MIDI device automatically; therefore,

no special driver is needed.

To establish MIDI communications with the unit by using an application, select “USB-MIDI” to deﬁne the unit as

a MIDI device.

Macintosh OS9 or earlier

The CP’s USB MIDI connector does not support Macintosh OS9 or earlier. Please establish a MIDI connection by

using a commercially available MIDI interface.

Summary of Contents for Concert Performer CP139



























































































































































































































Search results

Summary of Contents for Concert Performer CP139

Reviews:

Kawai Concert Performer CP139, Quick Start Manual, Page: 197 / 220

Search results

Summary of Contents for Concert Performer CP139

Reviews: