– 60 –
Transducer terminal (Large) (Small)
↑
↑
Speaker terminal
(Blue) (White)
Wiring the Transducer
Speaker relay biaxial cable (L)
KPBB-0806
Speaker relay
biaxial cable (L)
KPBB-0806
＊ Pass through the
notching of the
actuator cover.
Support
Soundboard
Support
【M-2】Installing.the.Actuator.(Transducer).and.the.Cover.Assy
Assembling.Instruction
1. Fasten the actuator assembled in 【M-1】 (previous page) on the pillar of piano
with two screws ⑦ .
＊取付位置は、ケース総組立図に従うこと。
2. Adjust the height of actuator following the adusting method below.
3. Wire the cables on the actuator.
＊ Follow.the.wiring.instruction.shown.in.the.drawing.in.the.middle..
4. Fasten actuator cover ⑥ on the pillar with four screws ⑦ .
Adjusting.the.Transducer.Height
1. ⑤ Loosen nut.
2. Turn the actuator nut ④ until the actuator cushion ③ touches the soundboard and the torque for
actuator nut becomes heavy.
3. Viewing from the bottom, add another rotation counterclockwise to actuator nut ④ to press the
actuator against the soundboard.
4. Tighten nut ⑤ firmly.
No..
Description.
Description
Remarks.
PN.
1. Actuator.Support.
Actuator.support.
See.M-1.
2. Actuator.
Actuator.
KSTR-001.
815500.
3. ACTUATOR.CUSHION.
Actuator.cushion
5.x. 85.
815781.
4. Actuator.Nut.
Actuator.nut.
918334.
5. SERRATED.FLANGE.HEX.
LOCK.NUT.
Serrated.flange.Hex.lock.nut M6.
861766.
6. Actuator.Cover.
Actuator.cover.
921670.
7. +.TRUSS.SELF.TAPPING.
SCREW.TYPE.A.
+.Truss.self.tapping.screw.
type.A
4.x.16..Black
878804.
