– –
Detail F
Detail F
Screw for
adjusting height
Stop rail bracket axis
＊ Hammer shank assy, wippen assy, keyboard, etc. are omitted in the drawing.
Position of screw and washer
Screw⑤ + Washer⑥
Screw⑤
【J-4】Installing the Sensor Arm and the Sensor
Assembling.Instruction
1. Insert screws ⑤ to the two end points of sensor (1) assy ③ (from the top), then press
fit nylon washers ⑥ from the bottom to prevent screws ⑤ from dropping.
＊.Refer.to."Position.of.screw.and.washer".in.the.drawing.below..（.and.so.on）
2. In the same way, attach four screws ⑤ and four nylon washers ⑥ on sensor (2) assy ④.
3. Insert six sensor arm assys ② on the axes of stop rail bracket assy. (See Detail F)
4. Fasten sensor (1) assy ③ and sensor (2) assy ④ on sensor arm assys ② with six
screws ⑤ .
5. Tighten six screws ⑤ into the height adjust screw socket of stop rail bracket assy,
then fasten sensor (1) assy and sensor (2) assy. (See Detail F)
No..
Description.
Description
Remarks.
PN
1. Action.Assy..(With.Shutter).
Action.assy
See.J-3.
2. Sensor.Arm.Assy.
Sensor.arm.assy
916391
3. Sensor.(1).Assy.
Sensor.arm.(1).assy
909106.[909041]
4. Sensor.(2).Assy.
Sensor.arm.(2).assy
909343.[909149]
5. +.BINDING.MACHINE.SCREW. +.Binding.machine.screw
M3.x.6..Black.
878804
6. Nylon.Washer.
Nylon.washer.
t=0.5.
2.7- 7
916412
.
Without.［.］=.GM,GE,RX-1
.
With［.］=.RX-2,3,5
