KaVo uniQa, Care Instructions

Page: 16 / 56

Care instructions KaVo uniQa
2 Reprocessing steps in accordance with ISO 17664 | 2.5 Reprocessing of the assembly kit for physiological saline
solution and surgical motor
16 / 56
4
If necessary, replace the turbine return air filter ( Mat. no. 0.200.3098 )
and clean the filter holder.
NOTE
All versions of the dentist element have the turbine return air filter in the
same place.
2.4.6 Reprocessing of cameras
Also refer to:
Instructions for use DIAGNOcam Vision Full HD
Instructions for use ERGOcam One
2.4.7 Reprocessing PiezoLED
Also refer to:
Instructions for use PiezoLED
2.5 Reprocessing of the assembly kit for physiological
saline solution and surgical motor
The assembly kit for the physiological saline solution and the surgical motor are
optional.
NOTE
The reprocessing steps for surgical motors with motor cable and for the
straight and contra-angle handpieces are described in the corresponding In-
structions for use.
NOTE
The reprocessing instructions have been validated by the manufacturer. Any
departure from the instructions provided must be checked by the repro-
cessing entity for efficacy and possible detrimental consequences.
2.5.1 Manual reprocessing
Manual cleaning
4 Use a soft disposable cloth to wipe down all visible surfaces of the unit,
bottle holder, foot control surfaces, and connecting cables.
Manual disinfection
NOTE
After each treatment of a patient, the surfaces near the patient that may have
been contaminated by contact or aerosol need to be disinfected. All disinfec-
tion measures need to be carried out by wipe disinfection.
NOTE
Please comply with the corresponding Instructions for use when you repro-
cess the motor and motor cable.
4
Use a soft disposable cloth and an approved disinfectant for disinfection by
wiping down all visible surfaces of the unit, bottle holder, foot control sur-
faces, and connecting cables. Make sure that all surfaces are fully wetted.
4 Let the disinfectant act for the prescribed time. Dry the surfaces.