3 Device upgrade
3.2 Drive the device to packing position
Drive the device to packing position.
1.
Go to device settings on the GUI.
2.
Select
Service mode
menu and enter PIN code
0612
.
3.
GUI:
Select
Service
menu.
4.
Select
Drive to packing position
.
5.
Press and hold down the exposure switch to drive the unit to the correct height.
6.
Power the device off.
3.3 Isolate the device from mains
Disconnect the mains power cable and other auxiliary connectors connected to the device carriage.
1.
Power off the device.
2.
Remove the screw on the bottom of the carriage back plate and remove the back plate.
ORTHOPANTOMOGRAPH
™
OP 3D
7
Summary of Contents for ORTHOPANTOMOGRAPH OP 3D
Page 2: ......
