3 Device upgrade
10.
Make sure that the sensor mount support rod is all the way in the slot on the sensor holder
assembly.
11.
Attach the sensor mount to the sensor holder assembly with 2 screws (M6x20, 1 on both sides of
the rod).
12.
Attach the previously removed 3D sensor to the 3D sensor mount with 4 screws.
NOTICE!
The black surface of the sensor must face the tubehead.
13.
Connect the 3D sensor data cables. The data cables have different type of connectors and can be
installed only in one way. After connecting the cables correctly the small red dots face outwards.
34
ORTHOPANTOMOGRAPH
™
OP 3D
Summary of Contents for ORTHOPANTOMOGRAPH OP 3D
Page 2: ......
