3 Device upgrade
3.
Move the rotating unit so that it is in a 90 degree angle with the upper shelf.
NOTICE!
The tubehead must be in home position (on the right hand side of the device).
4.
Push the cable clamp lid down and pull it open to release the main cable.
5.
Remove the screws on the linear movement sledge that hold the rotating unit.
Old design - 2 pcs
New design - 4 pcs
NOTICE!
Newer models have 4 screws.
20
ORTHOPANTOMOGRAPH
™
OP 3D
Summary of Contents for ORTHOPANTOMOGRAPH OP 3D
Page 2: ......