KaVo LUX 540 LED U Instructions For Use Manual Download

Page: 74 / 110

Instructions for use KaVoLUX 540 LED U / T

5 Mechanical settings | 5.1 Adjusting the swinging arm brake

74 / 110

5 Mechanical settings

5.1 Adjusting the swinging arm brake

Note

The swinging arm brake determines the ease with which the swinging arm
rotates.

▶

Rotate the swinging arm until the screw is visible under the hole.

▶

Tighten the screw to make it more difficult to rotate the swinging arm, or
loosen it to make it easier.

5.2 Set the spring arm brake

Note

Use the brake to set the smooth running of the spring arm rotation.

▶

Loosen and remove the cover

②

in an anti-clockwise direction.

▶

Use the brake screw

①

to set the smooth running.

Summary of Contents for LUX 540 LED U















































































































Search results

Summary of Contents for LUX 540 LED U

Reviews:

Related manuals for LUX 540 LED U

Brands by name

Popular brands

KaVo LUX 540 LED U, Instructions For Use Manual

Search results

Summary of Contents for LUX 540 LED U

Reviews:

Related manuals for LUX 540 LED U

Brands by name

Popular brands