KaVo LUX 540 LED U Page 54 Instructions For Use Manual Download

Page: 54 / 110

Instructions for use KaVoLUX 540 LED U / T

4 Assembly | 4.4 Assembly of the KaVoLUX 540 LED T

54 / 110

Final tasks

▶

Mount caps on the swinging and spring arm.

▶

Run function test.

▶

Perform the safety check according to the treatment centre.

▶

Mount the device covers.

4.4.3 Primus 1058 Life

WARNING

Electrical power.

Death or injury from electric shock.

▶

Before servicing, pull the mains plug out of the socket or completely discon-
nect the device from the power to de-energise it!

▶

After conversion, check the electrical safety according to DIN EN 62353
[IEC 62353].

Install the mounting pole

▶

Pivot the rear panel

①

outward on the bottom and pull the lugs

②

out in

downward direction.

▶

Unscrew the screw on the main switch to open the inner clamp.

▶

Dismantle the cover

①

using screw

②

Summary of Contents for LUX 540 LED U















































































































Search results

Summary of Contents for LUX 540 LED U

Reviews:

Related manuals for LUX 540 LED U

Brands by name

Popular brands

KaVo LUX 540 LED U, Instructions For Use Manual

Search results

Summary of Contents for LUX 540 LED U

Reviews:

Related manuals for LUX 540 LED U

Brands by name

Popular brands