35 / 44
LED Status Indicator on the CAP Converter/External Pushbutton
Function LED Colour
Signal
Description
Error
Red
LED fl ashes 1 x for 0.5 sec, then pauses for 2 sec
No connection to CAP
LED fl ashes 2 x for 0.5 sec, then pauses for 2 sec
Satellite not found
LED fl ashes 3 x for 0.5 sec, then pauses for 2 sec
Ignition active
LED fl ashes 4 x for 0.5 sec, then pauses for 2 sec
Turntable blocked
LED fl ashes 5 x for 0.5 sec, then pauses for 2 sec
Battery voltage too low
LED fl ashes 6 x for 0.5 sec, then pauses for 2 sec
Temperature warning
LED fl ashes 7 x for 0.5 sec, then pauses for 2 sec
Faulty channel list
LED fl ashes 8 x for 0.5 sec, then pauses for 2 sec
CAP software not up-to-date
LED fl ashes 9 x for 0.5 sec, then pauses for 2 sec
CAP requires calibration
To run the CAP converter in normal operation again:
1. Check the cause of error.
2. Press the pushbutton once to acknowledge the error so that the CAP converter can return to normal
operation.
Normal
operation
Green
LED fl ashes slowly
CAP is in parking position
LED fl ashes 3 x, then pauses briefl y
CAP is moving to a position,
e.g. to the parking position
LED fl ashes quickly
CAP is searching satellite
position
LED is permanently on
Satellite found
Red
LED is permanently on
Stand-by
Green-Red
LED quickly fl ashes 3 x green, 1 x red
CAP is reset and moving to the
parking position
USB
Update
Yellow
1)
LED is permanently on
Loading data from USB
Red-Green-Yellow LED fl ashes quickly
Update successful
Red
LED fl ashes 1 x for 0.5 sec, then pauses for 1.5 sec
Data carrier not found
LED fl ashes 2 x for 0.5 sec, then pauses for 1.5 sec
Directory/update fi le not found
LED fl ashes 3 x for 0.5 sec, then pauses for 1.5 sec
Invalid update fi le
LED fl ashes 4 x for 0.5 sec, then pauses for 1.5 sec
Saving of update fi le failed
1)
The red and the green LED on the external pushbutton light up simultaneously.