17 / 44
Malfunction and material damage due to reversed polarity!
When connecting the power cables, reversed polarity can lead to thermal overload and damage to compo-
nents when the equipment is powered up. If the earth (-) of the ignition signal and the earth (-) of the vehicle
battery for the turntable do not have the same potential, the automatic lowering of the turntable will not
work!
►
To ensure suffi cient power supply to the automatic turntable, connect the current-carrying wires (red,
black) directly to the vehicle battery.
►
In order for the turntable to lower automatically into the parking position, connect the green cable to the
ignition and the black cable to the vehicle battery.
►
The supplied fuse must be connected between the positive pole of the battery and the red cable of the
turntable.
►
For operation with two batteries, ensure that the earth of the ignition signal has the same potential as
the earth of the vehicle battery for the turntable.
►
Never reverse the poles (+ and -) when connecting the power cables (CAP converter and turntable) to the
vehicle electrical system.
Functional Instructions for Connection to the Vehicle Electrical System
Problems may occur if the devices are connected to diff erent connection sockets or circuits/earth potentials. It is recom-
mended to connect the connection sockets for the CAP converter to the same cable. Check the current carrying capa-
city of the circuit used with respect to the intended application.
12 V Battery Wiring Diagram
The complete wiring diagram of the CAP 850 GPS (turntable with control unit) can be found under
Overall Wiring
Diagram, p. 39
.
For operation with two batteries, ensure that the earth of the ignition signal has the same potential as the
earth of the supply battery for the turntable. Otherwise, the automatic lowering function will not work! Do
not reverse the polarity of the cable!
To ensure that the GPS data can be read and that the turntable is automatically lowered to the parking posi-
tion, connect the green wire to the ignition and the red and the black wire to the supply voltage.
12V
Slave coaxial cable
for second receiver
Master coaxial cable
Battery
10.5 V - 15.5 V
Ignition
black
red
green
Disconnect the turntable from the power supply
by removing the fuse in the power cable or the
disconnect on the battery. The disconnection
area must be easily accessible!
