33 / 44
Functional Instructions for Connection to the Vehicle Electrical System
Problems may occur if the devices are connected to diff erent connection sockets or circuits / earth potentials. If none
are available, it is recommended to connect the connection sockets of the turntable to the same cable. Check the
current carrying capacity of the circuit used with respect to the intended application.
12 V Battery Wiring Diagram
The complete wiring diagram of the CAP 850 GPS (turntable with control unit) can be found under
Overall Wiring
Diagram, p. 39
Operating the CAP Converter
External Pushbutton
Moving the Turntable from the Parking Position
Plug the included Kathrein push button into the CONTROL UNIT RJ12 socket
on the CAP converter (see
Connecting the
CAP Converter, p. 32
).
Press the button
►
The turntable moves to the last satellite position.
Moving the Turntable to the Parking Position
Press the button
►
The turntable moves to the parking position.
Resetting the Turntable
Keep the button pressed for 5 seconds
►
The turntable is being reset. The LED fl ashes 3 x green and 1 x red until the turntable is in the parking position.
12V
Battery
10,5 V - 15,5 V
red
black
Fuse 5A
HDS 50 Control Unit
Plug the HDS 50 control unit (optional accessory) into the CONTROL UNIT RJ12 socket on the CAP converter (see
Connec-
ting the CAP Converter, p. 32
).
The HDS 50 control unit can take over the complete control of your CAP 850 GPS (see
HDS 50 (Order No. 20410070), p. 6
).
Please refer to the HDS 50 user manual for detailed operating instructions.
CAPcontrol App
To control the CAP 850 GPS via the CAPcontrol app, you need the UFZ 132 USB/Wi-Fi adapter (optional accessory). The
adapter must be plugged into the USB port
of the CAP converter (see
Connecting the CAP Converter, p. 32
).
Then download the CAPcontrol app from the Play Store (Android) or App Store (iOS) and install it on your mobile device.
The exact functionality of the app can be found in the instructions that are included in the app.
The CAP converter should be
protected by a 5 A fuse. This is
to be connected between the red
connection cable and the battery.
