Katadyn Spectra Catalina 340C, Installation And Operating Manual

Page: 60 / 83

60
Settings
Dealer Access Settings
It is highly recommended that users consult with a factory trained technician before altering any settings behind
the
‘ Dealer Access Point ’. Changing this settings without understanding the full effect of each change can void
the warranty of your system, and cause irreparable damage.
If any settings are inadvertently changed, they can be reverted back to the defaults by using the ‘ Factory Reset ’
feature.
Default Login: admin
Default Password: admin
System Model: Configures the Spectra Connect for a different system model from a preset list of options.
Clear Statistics: Resets all of the Estimated Maintenance Intervals back to 100%. This feature should only be
used on a brand new system.
Change Username/password: Changes the default username and password. If you forget your changed
username and password, a Factory Reset will revert back to the default username and password.
Set MFD: Changes the Manufactured Date on the system. This should only be adjusted if a control board is being
replaced on an older system.
Set Serial ID: Changes the Serial Number recorded in the Spectra Connect. This should only be adjusted if a
control board is being replaced on an older system.
Limit Runtime: Limits the maximum run time for the system before shutting down and fresh water flushing.
Disabling this setting allows the watermaker to be operated 24/7.