68 E-MOTIKA
3.4 Quick release system of the seat
1. Move the quick release handle to OPEN position (OPEN sign faces
to the operator).
2. Rotate clockwise the adjusting nut, only until it contacts with the seat connector, and
then turn a circle or semi-circle in the opposite direction and push the quick release han-
dle to CLOSE position (as shown).
3. Push the side and front part of the seat by force; if the seat rotates upward at the left
and right or downward from up to down, should first check whether the seat bunch is
locked, and then check whether the quick release device is locked, and repeat the opera
-
tions above if necessary.
3.5 Quick release of front wheel
Please refer to Article 2.1 above, the installation of quick release front wheel and V brake
for the installation method of the quick release of the front wheel.
3.6 Reflection and lighting system
The reflection system includes a reflector on the wheel and front and rear reflectors (not
included, but necessary: reflectors on backpack, helmet and riding clothes). The light
-
ing system mainly includes the front and rear lights which are supplied by battery or by
self-power-generated energy. These items help to mark your own position when riding at
night, convenient for pedestrians and other vehicles on the roads (recommendation: pur-
chasers, in accordance with local laws, must use the reflector and lighting system).
3.7 Folding method of folding bike
1. Push the lock button to open position, open the fastening handle on stem.
2. Place the Vertical handle stems down downward until the Vertical handle stems con
-
tacts with the frame;
3. Rotate when loosening the closely locked handle counterclockwise;
4. Rotate the closely locked bolt to the left until the bolt is entirely out of the groove;
5. Lift the closely locked fastener upward so that the bolt bottom plane is higher, and ro
-
tate the front end of the frame to the left
1.
Pin
2.
Locking bolt
