![background image](http://html1.mh-extra.com/html/karcher/sg-4-4/sg-4-4_manual_655095012.webp)
12
English
Switching off the device
Note
The residual water can remain in the device.
1. Switch off the device at the switch.
2. Fold down the cover of the device socket and pull
the steam connector out of the device.
3. Pull the mains plug out of the socket.
Storing the device
Note
Always let the brushes cool down to prevent deforma-
tion of the bristles.
1. Place the manual nozzle, spotlight nozzles and
small parts in the accessory compartment.
2. Wrap the mains cable around the cable hooks when
the unit is stationary.
3. Insert the extension tubes individually into the re-
cesses on the base of the unit.
Using accessories
Note
Detergent residues or care emulsions on the surface to
be cleaned can cause streaks during steam cleaning,
but these disappear after repeated use.
Steam gun
Application examples for the steam gun without acces-
sories:
●
Eliminate odours and creases from hanging clothes
by steaming them at a distance of 10-20 cm.
●
Removing dust from plants. Maintain a distance of
20-40 cm.
●
Damp dusting by briefly steaming a cloth and wiping
it over furniture.
Spotlight nozzle
●
The cleaning effect increases the closer the nozzle
is held to the dirty area, since the temperature and
pressure of the steam are greatest at the emission
point.
●
The spotlight nozzle with the various attachments is
suitable for cleaning hard-to-reach areas, such as
e.g. corners, joints, etc., blinds, central heating, toi-
lets, stainless steel, windows, mirrors, fittings, coat-
ed and enamelled surfaces and for loosening stains.
●
The power nozzle increases the speed of the emit-
ted steam. It is therefore well suited for cleaning par-
ticularly stubborn dirt, blowing out corners, joints,
etc.
Note
The round brush is not suitable for cleaning sensitive
surfaces.
Floor nozzle
Floor nozzle with bristles
●
For abrasive cleaning of stubborn dirt.
●
Suitable for all washable wall and floor coverings,
e.g. stone floors, tiles and PVC floors. Work slowly
on surfaces that are heavily soiled so that the steam
has longer to take effect.
Floor nozzle with slats
●
For hygienic cleaning of smooth surfaces, as the
surface temperature is higher.
●
For a hygienic cleaning result, steam directly over
the hard surface at a working speed of max. 30 cm
/ second. In addition, set the VAPOHYDRO to the
minimum level and steam pressure to the maximum
level.
Using the floor cleaning cloth
Turn and change the floor cleaning cloth regularly to im-
prove dirt absorption.
1. Fasten the floor cleaning cloth to the floor nozzle. To
do this, fold the floor cleaning cloth lengthways and
place the floor nozzle on it, open the retaining clips,
place the ends of the cloth in the openings and
stretch tightly, close the retaining clips.
몇
CAUTION
Danger from retaining clips
Risk of crushing
Do not put your fingers between the retaining clips.
Manual nozzle
Suitable for small washable surfaces, shower cubicles,
mirrors or furniture fabrics.
1. Pull the terry cloth cover over the manual nozzle.
Window nozzle (special accessory)
Order number 4.130-115.0
1. Steam the glass surface evenly at a distance of ap-
prox. 20 cm.
2. Switch off the steam supply.
3. Pull off the glass surface in strips from top to bottom
with the squeegee.
4. Wipe the squeegee and the lower edge of the win-
dow dry after each run.
Wallpaper remover (special accessory)
Order number 2.863-076.0
The wallpaper remover can be used for removing wall-
paper with the steam cleaner.
Note
In the case of multiple-painted wood-chip wallpaper, the
steam may not be able to penetrate the wallpaper. In
this case, preliminary work with a pin roller is recom-
mended.
1. Apply the wallpaper remover to the edge of a wall-
paper strip over the entire surface and allow steam
to act until the wallpaper is soaked through (approx.
10 seconds).
2. Move the wallpaper remover without switching it off.
Lift the dissolved piece of wallpaper with a spatula
and peel it off the wall.
Transport
몇
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transporta-
tion.
1. For transport over short distances: Switch off the
heating, place the device in an upright position,
grasp the device by the carrying handle and the ex-
tension tube to carry it.
2. When transporting the device in vehicles, secure it
to prevent it from slipping or overturning in accord-
ance with the respective valid guidelines.
Storage
몇
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
The device may only be operated indoors.
Summary of Contents for SG 4/4
Page 3: ...1 5 3 2 6 7 9 4 8 10 B C D ...
Page 163: ......