Kärcher SC 1020 B, Quick Reference

Page: 14 / 150

14
English
Î
Empty the descaling solution after 8 hours. A
small amount of the solution will remain in
the boiler. Therefore, you should rinse the
boiler two to three times with cold water to re-
move any residues of the descaler.
Often, failures have simple causes and you can
do the troubleshooting yourself using the follow-
ing overview. If you are in doubt or if the failure is
not listed here please contact the authorized
customer service.

Danger
Always disconnect the mains plug and allow the
steam ironing station to cool down before per-
forming any maintenance work.
Repair works may only be performed by the au-
thorized customer service.
Î
Descale the steam boiler.
Î
Turn off the appliance.
Î
See"Refilling Water" Page13
During longer breaks from ironing, the steam in
the steam line can condense.
Î
Direct the first burst of steam at a separate
piece of cloth.
Î
Set the thermostat to level •••.
Î
Rinse or decalcify the steam boiler.
Note: There can be odor during the first applica-
tions. This does not have any affect on the func-
tion of the steam ironing station. The odor will
dissipate with time.
Use only original KÄRCHER spare parts. You
will find a list of spare parts at the end of these
operating instructions.
Subject to technical modifications!
Troubleshooting
Long heating-up time
Steam boiler is decalcified.
No steam
No water in the steam boiler.
After breaks during ironing, water drops will
come out of the steam iron.
Steam iron "spits out" water!
Spare parts
Technical specifications
Power connection
Voltage 220-240
1~50/60 V
Hz
Protective class I
Protection class IPX4
Performance data
Heating output 2200 W
Operating pressure max. 0,32 MPa
Heating time
per litre of water 7 Minutes
Max. steam quantity 65 g/min
Dimensions
Boiler capacity 1,2 l
Weight (without accessories) 3 kg
Width 250 mm
Length 381 mm
Height 260 mm