BR/BD 100/250 R BP / RI
Basic settings and service procedures
Page 93 / 171
Service Manual 08.2007
5.3 Setup menu
5.3.1.3 Cleaning module and lifting module parameters
Note:
If the i-button is not pressed within 30 seconds
the program automatically switches to
Battery: E.......F
Water/C: E.......F
Then restart as described in Chapter 5.3.1.1
5.2.b Access to the setup menu
(See chapter 5.3.1.1)
Display
Parameter menu
lifting module(1)?
yes
no
yes
no
yes
no
yes
no
Display
Return to setup
module selection?
Display
Parameter menu
clean module (2)?
Display
Return to setup
module selection?
Display
Parameter menu
lifting module (2)?
Display
Return to setup
module selection?
yes
no
yes
no
Display
max speed
M2/D-S
40%
max speed
M2/U-S
40%
max speed
M2/D-S
40%
max speed
M2/U-S
40%
Note:
If the I-button is turned in an anti-clockwise direction the cursor works in the opposite direction, i.e. the menu is called
up from the last to the first parameter. The last saved cursor can be called up again after quitting the menu, e.g. by
switching back to the standard display (battery display).
Display