Unit functions
BR/BD 100/250 R BP / RI
Page 62 / 171
Service Manual 08.2007
3.3.7 Polishing (with suction)
Display
Battery:
E....F
Water/C:
E....F
Drive motor (M1) active
Magnetic brake (Y1)
released
Display
Battery:
E....F
Water/C:
E....F
Display (flashing)
brush pressure:IIIIII
Display (flashing)
brush pressure: II
Change value (+/-)
Display
brush pressure: II
new set value saved
Operator menu - polishing&vacuum
- Brush pressure
(only adjustable in driving operation)
- FACT
(Adjustable when stopped)
- Brush after-run
(Adjustable when stopped)
- Working speed
(Adjustable when stopped)
- Quit info display
(Adjustable when stopped)
- Quit operator menu?
(Adjustable when stopped)
Display
brush pressure:IIIIII
Switch program switch to Pos. 6
- Suction motor (M4) „ON“, suction beam lifting motor (M30) lowers suction beam, if direction of travel switch (S2) switched into forwards direction
- If drive motor active (M1)
- Lifting motor lowers the brush head (M20)
- Start brush motors (M2, M3)
Initial startup
Shutdown procedure
yes
no
yes
no
no
yes
no
no
Note: i-Button
If the i-button is not pressed for longer
than 10 seconds the program
automatically switches back to:
Display
Battery/water
