Kantech IoPass SA-500, Installation Manual

Page: 11 / 36

I n s t a l l i n g a n d W i r i n g I o P a s s ™ - S e t t i n g R e l a y 1 F u n c t i o n s
11
2.11 Setting Relay 1 Functions
Depending on how you intend to use Relay-1, you will
need to configure the jumpers, located on the SA-RM56
relay module, before you mount it inside the wall.
NOTE: For more information on the relay function, please
refer to “Relay-1 Functions” (page 15).
Jumper Settings:
2.12
Connecting the Power
Once all other wiring is complete, power up the unit.
Wiring Diagram
NOTE: Once all connections are finished, you may start to
program the unit. Before you do so, we recommend you
read the section called “Programming IoPass™ -
Introduction” (page 13).
Relay-1 Function
Function 1 2 3
DURESS ON OFF OFF
GUARD OFF ON OFF
AUX. CARD OFF OFF ON