I n t r o d u c t i o n t o I o P a s s ™
- P r o d u c t O v e r v i e w
7
S e c t i o n 1 • I n t r o d u c t i o n t o I o P a s s ™
1.1
Product Overview
The IoPass is a fully programmable stand-alone access
control system that allows entry using proximity
technology, keypad or both, for up to 5,000 users. Compact
and surface mount, the IoPass is programmed directly from
the keypad. The system is available in two models: with
integrated or external proximity reader.
Easy Programming
Programming is performed directly from the keypad with
visual confirmation of each operation on the 16-character,
2-line LCD display.
Custom Language
IoPass lets you select the system operating language.
Messages are displayed in English, French, Spanish,
German and Dutch.
Lockout on Invalid Password
To prevent unauthorized persons from gaining password
entry by trial and error, the system activates an alarm relay
and/or automatically deletes the card number after five
tries, once the option is selected in the system.
Integrated or External IoProx Proximity Reader
Two IoPass models are available. The integrated proximity
reader model is used for indoor installations. The external
proximity reader model provides a vandal and weather
resistant feature.
Higher Security Provided by Concealed Relay Module
The IoPass relay module is separate from the unit and can
be concealed inside a wall or ceiling. The relay module
acts as a connecting module between the IoPass unit and
the system devices. Devices (door contact, strike, exit
button or detector, alarm annunciator, power, etc.) are
connected to this module.
1.2
About this Manual
This Installation Manual provides installation and
programming instructions for IoPass installers. Please read
this manual carefully before installing or programming the
IoPass unit.
1.2.1 - New in this Version
This version of the manual was released to support the new
revision of the IoPass firmware (as of version 2.22 The
new features include:
1.
Reset
function: you can clear the IoPass memory and
reset it to factory default values.
2.
View
function: you can view the next and previous
card (access and auxiliary card) programmed in the
system.
3.
Custom language selection: the IoPass unit can be
operated in five languages (English, French, Spanish,
German and Dutch).
4.
More transaction in the
Audit trail
: 380 last
transactions (instead of 10).
5.
User PIN required for arming/disarming the unit.
1.2.2 - Record Sheet and Worksheet
You can find the
Card Information Record Sheet
on
page 30. Please photocopy this form as reference material
so you can keep a record of the cards that are programmed
in the IoPass unit.
You can also find a
Programming Worksheet
to record
the settings that were modified within the unit. For more
information, refer to the “ Quick Reference Programming
Table”, page 28.
1.3
Features
• Proximity type reader with a read range up to 10 cm
(4");
• Capacity to store up to 5,000 user records;
• Large 2-line LCD of 16 characters with back light
feature including power saver function: the backlight
will turn off if inactive for more than 3 minutes;
• Three (3) access mode options:
• Card only (default);
• Card and PIN;
• Card only
OR
main password.
• Relay 1 offers one of the three (3) following options:
• Ability to arm and disarm an external alarm system;
• Duress function;
• Auxiliary card function.
• Cards can be enrolled/deleted in batch mode;
• The “Alarm Relay” can be activated if:
• an incorrect password is entered five times
consecutively within four (4) minutes;
• the unit detects a forced entry;
• the front cover of the unit is removed (tamper alarm
function);
• the door is opened longer than pre-set time (door ajar
function).
• Last 380 Access Granted card numbers can be viewed
on-screen;
• Audible key tones;
• Strike, alarm and duress relay have a selectable
activation timer (1-255 seconds);
• Selectable door left open timer (1-255 seconds);
• Can be mounted on a standard flush mount electrical
box (vertical or horizontal positioning of the box
acceptable).
Summary of Contents for IoPass SA-500
