48
1.43
Katherm HK
Ready-to-install trench heaters with EC tangential fan
Assembly and installation instructions
Step 4:
Set the
switch-off time
you require by turning the navigator dial.
Once the minutes have been set, press the navigator dial to apply the
switch-off time
and to call up the timer start screen ( Action 1).
IMPORTANT NOTE:
Call up the respective weekday and associated timer program no. to
delete switching-on and switching-off times entered (Action 1 +
Action 2). Replace the switch-on or off time entered by „– – : – –“
(Action 3 + Action 4).
You can overwrite timer entries at any time either as a block or for each
day
Only request switch-on and off times singly for each day. It is not
possible to request switching-on and off times as a block where there
are differing time entries for the respective days of the week and the
time is then shown by "– –": – –”!
To exit the "Timer programs" selection menu, press and hold down the
navigator dial for 3 seconds in the timer program start screen or do not
use the KaController for 15 seconds.
Input screen for
switch-off time
Summary of Contents for Katherm HK Series
Page 83: ......
