26
1.43
Katherm HK
Ready-to-install trench heaters with EC tangential fan
Assembly and installation instructions
* With Katherm HK 290, H = 160 mm or HK 360, H = 210 mm , the installation position of the
condensation tray and thus also the corresponding dimensions are identical to those of the Katherm HK
320, H = 130 mm. Only the dimensions of the trench height differ.
Step 4:
Fix a section of condensate hose
6
to the float module
with a cable tie provided. Use the coupling section
5
to connect the
condensation hose section to the condensation bend section
4
. You
will need cable ties to fix it in place. Then use the hose clamp to fix the
condensation bend section to the outlet connection of the condensation
tray
8
.
Step 5:
Please refer to the separate manufacturer's installation instructions
and the electrical wiring information for further steps to ensure the correct
installation of the condensate pump.
Window-side
Window-side
Window-side
Example shown: Katherm
HK 320, 4-pipe with
valves fitted
Example: Plan view of Katherm
HK 320 with condensation
pump fitting kit installed
Recommended order of assembly
1. Condensation pump fitting kit
2. Valves with actuator
Side view
Front view
Summary of Contents for Katherm HK Series
Page 83: ......
