39
Katherm HK
1.43
Ready-to-install trench heaters with EC tangential fan
Assembly and installation instructions
Kampmann KaControllers and KaControl modules are built in line with the state
of the art and recognised safety regulations. Nevertheless, its use can result in
danger to people or damage to the units or other material property if it is not
appropriately installed and operated or correctly and properly used.
Applications
The KaController should only be used as a room control unit in conjunction with
Kampmann systems.
KaControllers should only be used
indoors (for instance in residential properties and offices, showrooms etc.)
KaControllers should not be used
outdoors,
in humid areas, such as swimming pools, in wet rooms,
in areas where there is a risk of explosion,
in areas with a high dust content,
in areas with an aggressive atmosphere
Protect the products from any moisture during installation. Check the application
with the manufacturer in case of any doubt. Any use other than the use
specified above is deemed not to be correct and proper.
The operator of the unit is solely responsible for any damage arising as a result
of this. Intended use is deemed to include observing the installation instructions
described in these instructions.
Specialist knowledge
The installation of this product requires specialist knowledge of heating, cooling,
ventilation and electrical engineering. This knowledge, generally learned in
vocational training in one of the fields mentioned above, is not described
separately. Damage caused by improper installation is the responsibility of the
operator.
The installer of these units should have adequate knowledge of the following
gained from specialist vocational training
safety and accident prevention regulations
guidelines and recognised technical regulations, i.e. Association of German
Electricians (VDE) regulations, DIN and EN standards.
Purpose and scope of these instructions
This manual contains information on the commissioning, functionality and
operation of the KaControl system. The information contained in these
instructions can be changed without prior notification.
These instructions only outline a few of the possible options.
All the setting options can be found in the complete instructions for the
KaControl at “www.Kampmann.de/.....”
14. Katherm HK, KaControl model (*C1)
14.1 Intended use
Summary of Contents for Katherm HK Series
Page 83: ......
