background image

7

8. 

Water tank inlet: wide inlet allows for 

easy filling of the tank

9. 

Heating / Auto-off indicator light: 

- Will illuminate while the iron is 

heating and switch off once the iron 

has reached the pre-set temperature 

- Will flash when the auto-off function 

has activated 

10. 

3 metre textile cord: allows for greater 

reach and better flexibility

11. 

Self-clean button: assists with the 

removal of impurities that may build 

up in the iron over use

12. 

Large 380ml water tank

13. 

2400 watt for fast heat up

Not Shown

• 

Anti-drip system: stops water from 

dripping onto fabric while ironing 

• 

One temperature; pre-set to the 

perfect temperature for all fabric 

types

• 

Water cup: for filling the water tank

Your Kambrook FabriGuard One 

Temperature Iron

1. 

Ionic ceramic soleplate with over 

460 steam holes: to maximise steam 

delivery and effortlessly glide across 

fabric to remove wrinkles

2. 

Collar tip design: to easily iron around 

buttons and pockets

3. 

Fine misting spray button: dampens 

fabric when ironing with no steam

4. 

Misting spray nozzle

5. 

Double anti-calc system:  

- Removable anti-calc filter to help 

filter impurities from water added to 

the refillable water tank 

- Internal filter cartridge to remove 

scale and particles that may clog 

steam holes

6. 

Burst of steam button: for an extra 

steam boost on thick fabrics and 

tough creases (can be used vertically 

or horizontally)

7. 

Variable steam control: allows you to 

select the amount of steam required

Summary of Contents for KIR931 series

















Reviews: