background image

4

Kambrook Recommends Safety First

IMPORTANT: Please  

retain your instruction 

book for future use.

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer can confidently use 

and trust our products. We ask that any electrical appliance that you use 

be operated in a sensible fashion with due care and attention placed on 

the following important operating instructions.

Important Safeguards For Your Kambrook  

FabriGuard One Temperature Iron

•  Carefully read all instructions before 

operating the iron for the first time and 

save for future reference.

•  Remove and safely discard any 

packaging material and promotional 

labels before using the iron for the 

first time.

•  To eliminate a choking hazard for 

young children, remove and safely 

discard the protective cover fitted to 

the power plug of this iron.

•  When unpacking the iron, check to 

see you have received all the items 

listed in the parts list before discarding 

the packaging.

•  Always ensure the iron is properly 

assembled before use. Follow the 

instructions provided in this book.

•  Do not touch hot surfaces. High 

temperatures are generated during 

use, which could cause burns. Always 

use the handle and warn others 

(especially children) of the possible 

dangers of burns from steam, hot 

water and hot surfaces, especially 

when ironing vertically.

•  Do not use outdoors or in bathrooms.

•  Always test the iron on a small discreet 

piece of fabric to ensure the iron has 

reached its optimum temperature.

•  Never use the vertical steam shot 

while clothes are on the body and 

never direct the steam towards 

people.

•  Do not place the iron near the edge 

of a bench, table or ironing board 

during operation. Ensure the surface is 

level, clean and free from water and 

other substances.

•   Do not operate the iron on a sink drain 

board.

•  Auto-off safety protection is designed 

as a safety feature only. The iron 

should not be left on deliberately 

when unattended. If auto-off 

safety protection has activated 

and no further ironing is required, 

we recommend that the iron is 

switched off at the power outlet and 

unplugged.

Summary of Contents for KIR931 series

















Reviews: