background image

6

Important Safeguards For All  

Electrical Appliances

•  Fully unwind the power cord  

before use.

•  Connect only to a 230V or 240V 

 power outlet.

•  Do not let the power cord hang over 

the edge of a bench or table, touch 

hot surfaces or become knotted.

•  To protect against electric shock, 

do not immerse the power cord, 

power plug or appliance in water or 

any other liquid or allow moisture to 

come in contact with the part, unless 

it is recommended in the cleaning 

instructions.

•  The appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience 

and knowledge, unless they have 

been given supervision or instruction 

concerning use of the appliance by a 

person responsible for their safety.

•  Children should be supervised to 

ensure that they do not play with the 

appliance.

•  It is recommended to regularly inspect 

the appliance. To avoid a hazard, do 

not use the appliance if power cord, 

power plug or appliance becomes 

damaged in any way. Return the 

entire appliance to the nearest 

authorized Kambrook service centre 

for examination and / or repair.

•  Any maintenance other than cleaning 

should be performed at an authorised 

Kambrook Service Centre.

•  This appliance is for household use 

only. Do not use this appliance for 

anything other than its intended use. 

Do not use in moving vehicles or 

boats. Do not use outdoors.  

Misuse may cause injury.

•  The installation of a residual 

current device (safety switch) is 

recommended to provide additional 

safety protection when using electrical 

appliances. It is advisable that a safety 

switch with a rated residual operating 

current not exceeding 30mA be 

installed in the electrical circuit 

supplying the appliance. See your 

electrician for professional advice.

•  Always turn the appliance to the OFF 

position, switch off at the power outlet 

and unplug at the power outlet when 

the appliance is not in use.

•  Before cleaning, always turn the 

appliance to the OFF position, switch 

off at the power outlet, unplug at 

the power outlet and remove the 

power cord, if detachable, from the 

appliance and allow all parts to cool.

•  Do not place this appliance on or 

near a heat source, such as hot plate, 

oven or heaters.

•  Position the appliance at a minimum 

distance of 20cm away from walls, 

curtains and other heat or steam 

sensitive materials and provide 

adequate space above and on all 

sides for air circulation.

Summary of Contents for KIR931 series

















Reviews: