11
Fig. 3
•
Overturned – 30 seconds with no
movement
Once the iron has turned itself off, the
auto-off light will continue to flash. To
re-activate simply move the iron. The
heating light will illuminate and will then
turn off when the iron has reached
temperature and is ready to use again.
After Each Use
Once you have finished ironing, slide the
steam control switch to ‘NO STEAM’ and
place the iron on its heel.
Switch the power off at the power outlet
and disconnect the power cord from the
power outlet.
Open the water tank inlet and (over a
sink or bucket) invert the iron to empty
any remaining water from the tank.
Ensure the iron has cooled down before
storing.
CAUTION:
Always switch
iron off at the power
outlet and unplug when
not in use.
Summary of Contents for KIR931 series
Page 2: ...Suits all KIR931 models INSTRUCTION BOOKLET...
Page 15: ...14 Notes...
Page 16: ...15 Notes...
