Kambrook KIR931 series, Instruction Booklet

Page: 11 / 16

10
CAUTION:
Never use the
vertical steam shot while
clothes are on the body
and never direct the
steam towards people.
NOTE:
For optimal steam burst,
leave an interval of 4 seconds
between the pressing of the shot of
steam button.
The shot of steam can be used at
any steam setting including ‘NO
STEAM’.
Using the Fine Mist Spray
The fine mist spray can be used to
dampen difficult to iron areas and
accidental creases.
Position the iron on the fabric, pointing
the tip towards the desired area. Firmly
press the fine mist spray button and a fine
spray of water will be produced in front
of the iron.
Anti-Drip System
The Kambrook FabriGuard One
Temperature Iron is equipped with
an anti-drip system. The iron will
automatically close the steam valve
when the soleplate temperature is too
low to produce steam. This prevents
water from the water tank escaping
through the soleplate. The steam valve
will open once the soleplate has reached
the correct temperature required to
create steam.
Safety Auto-Off
The Kambrook FabriGuard One
Temperature Iron features 3-way safety
auto-off protection. This feature is
designed to automatically switch the iron
off if it is left unattended (no movement)
for a specified period of time (See Fig.
1,2 & 3).
When the auto-off function is about to
activate, the light at the base of the
handle will flash in warning.
3 Way Auto-Off Settings
Fig. 1
•
Vertical – 8 minutes with no
movement
Fig. 2
•
Horizontally – 30 seconds with no
movement
Using Your Kambrook Iron
continued