KAESER Premium Compact W 200/4, Service Manual

Page: 59 / 64

12 Decommissioning, Storage and Transport
12.1 Decommissioning
Decommissioning is necessary, for example, under the following circumstances:
■ the machine is temporarily not needed,
■ the machine is to be moved to another location,
■ The machine is to be scrapped.
Temporary decommissioning
Precondition The machine can be started at regular intervals.
➤ Run the machine once a week under load for at least 30 minutes to ensure corrosion protec‐
tion.
Long-term decommissioning
Precondition The machine must have run for at least 30 minutes before before long-term de-commissioning.
The power supply isolating device is switched off,
it is locked off,
a check has been made that no voltage is present on the machine.
Machine fully vented (no pressure).
1. Allow the machine to completely cool down.
2. Spray the valves and cylinder bore with Shell Ensis 20 preserving oil.
The oil does not need to be removed when re-commissioning.
3. Drain all condensate.
4. Disconnect all air and electrical connections.
5. Spray all contacts and terminals with a preservative (e.g. Rivalto, W.S.X.).
12.2 Packing
A wooden crate is required for overland transport to protect the machine from mechanical damage.
Other measures must be taken for the transport of machines by sea or air. Please contact
KAESER Service for more information.
Material Desiccant
Plastic sheeting
Wooden crate
Precondition The machine is decommissioned.
Machine is dry and cooled down.
1. Wrap the machine fully in plastic sheeting.
2. Place sufficient desiccant (e.g. silica gel) inside the plastic sheeting.
3. Protect the machine in a wooden crate against mechanical damages.
12 Decommissioning, Storage and Transport
12.1 Decommissioning
No.: 9_9418 20E
Service Manual Reciprocating compressor
Premium compact W
49