KAESER Premium Compact W 200/4, Service Manual

Page: 17 / 64

➤ Mark the oil that your compressor contains in the table below.
Standard oil Special oil
Oil type SAE 5 W30 FGP
Field of application Standard oil for all applications
except in connection with food‐
stuffs.
Specifically for machines in ap‐
plications where the com‐
pressed air may come into con‐
tact with foodstuff.
Maximum permissible oil
change interval in operating
hours/years.
1000/2* 1000/2*
Oil contained in my compressor
* Cool to moderate ambient temperatures, low humidity, low to average duty cycle.
Tab. 12 Compressor oil recommendations
2.9.1 Compressor oil charge
Compressor block type Total charge [litres] Topping up volume [litres]
(minimum–maximum)
KCC 160 0.13 0.05
KCC 200 0.13 0.05
KCC 250 0.13 0.05
KCC 300 0.13 0.05
Tab. 13 Compressor oil charge
2.10 Power Supply
Basic requirements
The machine is designed for a power supply conforming to EN 60204–1 (IEC 60204–1), sec‐
tion 4.3.
In the absence of other user-specified conditions, the limits laid down in this standard must be ad‐
hered to.
It is recommended that the user and the supplier reach an agreement on the basis of the
EN 60204-1, Annex B.
Check and adjust for other deployment conditions before commissioning.
2.10.1 Single phase
The machine requires a symmetrical single-phase power supply.
The machine may only be operated from an earthed single-phase supply network.
Further information When connecting to a European 230 V/1/50 Hz power supply the requirements in chapter 2.11 are
also to be observed.
2 Technical Specifications
2.10 Power Supply
No.: 9_9418 20E
Service Manual Reciprocating compressor
Premium compact W
7