Fig. 42 Changing the oil filter
1
Engine
2
Engine block
3
Oil filter
4
Direction of rotation (loosen oil filter)
Removing the old oil filter
1. Open the right-hand access door.
2. Prepare a receptacle.
3. Loosen oil filter (turn in direction of arrow
4
).
4. Remove the oil filter.
5. Catch any escaping engine oil.
6. Carefully clean sealing surface using lint-free cloth.
Installing the new oil filter
1. Lightly oil the gasket of the new filter.
2. Set oil filter into installation position.
3. Turn the new oil filter clockwise using only hand force until the gasket fits tightly on the sealing
surface.
4. Tighten new oil filter by hand force.
Checking the oil level
➤ Check the engine oil level.
Engine oil level too low.
➤ Replenish engine oil.
Dispose of old oil filter, old oil and materials contaminated with oil according to applicable en‐
vironmental protection regulations.
10 Maintenance
10.4 Drive engine maintenance
120
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M55 PE SIGMA CONTROL SMART pV
No.: 902366 10 USE
