Kaco blueplanet 15.0 TL3, Manual, Page: 38 / 96

Country-
spec. Set-
tings Men
u
level Display/
Setting Action in this menu/meaning
4 1 2 3 4
Save to USB
NOTE: Opportunity to export the operating data to a connec-
ted USB storage device.
↻
You have connected a USB storage device to the device.
1. Select the data to be exported (year, month or day).
2. Press the
Enter button
.
ð The device writes the data to a connected USB storage device.
4 1 2
3
4
Settings F Open the menu: Press the
Right arrow button
or
Enter
button
.
4
1
2 3
Language F Select the required language for the user interface.
4
1
2 3
Def. total yield
NOTE: You can set the total yield to any value, for example,
when you have received a replacement device and want to
continue the recording from the present value.
F Select the
Save
button and confirm with the
Enter button.
4
1
2 3
Interface
NOTE: The address must not be the same as the address of an-
other device or a Powador-proLOG device
.
F Assign a unique RS485 bus address to the device.
4
1
2 3
Priwatt F Open the menu: Press the
Right arrow button
or
Enter
button
.
4 1 2 3 4
Activation mode
NOTE: Re-activation depends on the operating mode selected
and on the activation conditions.
F
Activate function for a cycle
4 1 2 3 4
Monitoring time F Set time span during which the power threshold must be exceeded
without interruption.
4 1 2 3 4
Power threshold F Set power threshold from which the monitoring time up to activation
begins.
4 1 2 3 4
Operation mode 1. Power-dependent: the function remains active until below the set
power threshold.
2. Time-dependent: The function is active independent of the sunlight
for the set operation time.
4 1 2 3 4
Operation time
NOTE: The menu option is only available in "Time-dependent"
operation mode.
F After connection, the function is active for the set operation time.
4
1
2 3
Quick start
F
Reduce the waiting times during the self-test by pressing
the
Activate
button.
4
1
2 3
Logging interval
F
Specify the time period between 2 log data recordings.
4
1
2 3
Log data backup
NOTE: The device supports the backing up of all recorded
yield data to a connected USB storage device.
F
Activate or deactivate log data backup
4
1
2 3
Display 1. Configure the contrast setting for the display.
2. Set the length of time without user input after which the backlight-
ing of the LCD switches off.
3. Alternatively: Permanently activate or disable the backlighting by
selecting "
On
" or "
Off
".
9 | Configuration and operation Manual
KACO blueplanet 15.0TL3 KACO blueplanet 20.0TL3 Page 38
EN